Canon imageCLASS MP390 User Manual Download Page 66

Page: 66 / 189

Photo Printing from a Memory Card

Chapter 5

Follow this procedure:

Turn ON the machine, and load A4- or letter-size paper in the
multi-purpose tray.

• Use completely white plain paper when printing a Photo Index Sheet.

NOTE

• For details on print media, see page 33.
• For details on how to load print media, see page 40.

Insert the memory card into the card slot. (See page 59.)

Press [Photo Index Sheet].

Use [ ] or [ ] to select <

PRINT

Press [OK].

If 30 or fewer images are stored on the memory card:

1. The Photo Index Sheet is printed.

2. Go to step 8.

If 31 or more images are stored on the memory card:

1. Go to step 6.

Use [ ] or [ ] to select the range of photographs to print on the Photo
Index Sheet.

– <

ALL PAGES

Prints all image data stored on the memory card.

– <

LAST IMAGE

Prints image data stored on the memory card in chronological order
beginning from the most recently recorded date.

– <

SELECT RANGE

Prints image data stored on the memory card according to a specified
range of recorded dates.

If you select <

ALL PAGES

1. Go to step 7.

[PHOTO INDEX SHEET]

< PRINT > SCAN

[PHOTO INDEX SHEET]

< PRINT > SCAN

SHEET (LTR or A4)

ALL PAGES

Summary of Contents for imageCLASS MP390






























































































































































































Search results

Summary of Contents for imageCLASS MP390

Reviews:

Canon imageCLASS MP390, User Manual, Page: 66 / 189

Search results

Summary of Contents for imageCLASS MP390

Reviews: