Canon imageCLASS MP390 User Manual Download Page 137

Page: 137 / 189

Chapter 13

Maintenance

135

Cleaning the platen glass and document cover

Cleaning the exterior

Wipe the machine’s exterior with a clean, soft, lint-free cloth soaked in water and tightly wrung.

Cleaning the roller

Clean the roller when print media does not feed correctly.

Follow this procedure:

Wipe the platen glass

, and the inner side of the

document cover (white area)

with a clean, soft,

lint-free cloth moistened with water. Then wipe with
a clean, soft, dry, lint-free cloth making sure not to
leave any residue, especially on the platen glass. If
you have trouble getting the scanning area clean, wipe
with diluted mild detergent.

Remove any print media from the multi-purpose tray.

Press [Additional Functions].

Use [ ] or [ ] to select <

3.MAINTENANCE

Press [OK].

Use [ ] or [ ] to select <

5.ROLLER CLEANING

Press [OK].

• The machine starts cleaning the roller.

When cleaning has finished, repeat steps 2 to 6 twice.

Load A4- or letter-size plain paper in the multi-purpose tray and repeat
steps 2 to 6 three more times.

MAINTENANCE

5.ROLLER CLEANING

ROLLER CLEANING

Summary of Contents for imageCLASS MP390






























































































































































































Search results

Summary of Contents for imageCLASS MP390

Reviews:

Canon imageCLASS MP390, User Manual, Page: 137 / 189

Search results

Summary of Contents for imageCLASS MP390

Reviews: