Canon Color iR C3480, Service Manual

Page: 659 / 774

Chapter 17
17-56
DC-CON Clears DC controller PCB's RAM.
MEMO:
The RAM is cleared after the main power switch is turned OFF/ON.
Operation method
1) Select COPIER > FUNCTION > MISC-P > P-PRINT to print out the service mode setting values.
2) Select this item, then press the OK key.
3) Turn the main power OFF/ON.
4) Enter the data printed by the P-PRINT operation as needed.
1
R-CON Use it to reset the RAM on the reader controller PCB.
Method of Operation
The RAM will not be cleared until the main power switch has been turned off and then on again.
2) Select the item, and press the OK key.
3) Turn off and then on the main power.
4) As necessary, enter the settings printed out using 'PRINT'.
1
JAM-HIST Clears reader controller PCB's RAM.
MEMO:
The RAM is cleared after the main power switch is turned OFF/ON.
Operation method
1) Select COPIER > FUNCTION > MISC-P > P-PRINT to print out the service mode setting values.
2) Select this item, then press the OK key.
3) Turn the main power OFF/ON.
4) Enter the data printed by the P-PRINT operation as needed.
1
ERR-HIST Clears error code history.
MEMO:
The error code history is cleared after the main power switch is turned OFF/ON.
Operation method
1) Select this item, then press the OK key.
2) Turn the main power OFF/ON.
1
PWD-CLR Clears "System administrator" password set in user mode.
MEMO:
The password value is cleared after the main power switch is turned OFF/ON.
Operation method
1) Select this item, then press the OK key.
2) Turn the main power OFF/ON.
1
ADRS-BK Clears address book data.
MEMO:
The address book data is cleared after the main power switch is turned OFF/ON.
Operation method
1) Select this item, then press the OK key.
2) Turn the main power OFF/ON.
1
CNT-MCON Clears service counters maintained by main controller PCB (main).
(See the COUNTER mode items for the counters cleared.)
MEMO:
The counter values are cleared after the main power switch is turned OFF/ON.
Operation method
1) Select this item, then press the OK key.
2) Turn the main power OFF/ON. 1
CNT-DCON Clears following service counters maintained by DC controller PCB:
- COPIER>COUNTER>DRBL-2>SORT
- COPIER>COUNTER>DRBL-2>FIN-STPR
- COPIER>COUNTER>DRBL-2>FIN-PDDL
- COPIER>COUNTER>DRBL-2>SADDLE
- COPIER>COUNTER>DRBL-2>SDL-STPL
Attention:
The counter values are cleared after the main power switch is turned OFF/ON.
Operation method
1) Select this item, then press the OK key.
2) Turn the main power OFF/ON.
1
OPTION Restores OPTION service mode setting values to default values (RAM clear values).
Attention:
The setting values are cleared after the main power switch is turned OFF/ON.
Note The cleared data is the data in the main controller, DC controller and reader controller.
Operation method
1) Select COPIER > FUNCTION > MISC-P > P-PRINT to print out the service mode setting values.
2) Select this item, then press the OK key.
3) Turn the main power OFF/ON.
1
MMI Clears following user mode setting values:
- Backup data for copy operation panel (user-set values)
- Common settings backup data (user-set values)
- Backup data (except fax data) (user-set values)
Attention:
The setting values are cleared after the main power switch is turned OFF/ON.
Operation method
1) Select this item, then press the OK key.
2) Turn the main power OFF/ON.
1
COPIER>FUNCTION>CLEAR
Sub item Description level.