Chapter 7
7-52
F-7-87
After attaching the transfer cleaner unit, make sure to check visually that the
scraper sheet is not folded at the both side of the transfer cleaner unit.
If the scraper sheet is folded, push the scraper sheet [2] with the paper folded
in three [1] etc.
F-7-88
7.9.7.3 Points to Note When Replacing the Transfer
Cleaner Unit
0015-6942
Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /
Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR
C3080i / iR C2550
When replacing the transfer cleaner unit, make sure to apply the lubricant
(cefbon) to the scraper sheet.
7.9.8 Secondary Transfer External Roller
7.9.8.1 Removing the Secondary Transfer Outer Roller
0014-1321
Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /
Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR
C3080i / iR C2550
1) Open the right cover.
2) Remove the transfer separation guide [1].
- 2 screws [2]
F-7-89
3) Detach the plate [1].
- 2 screws [2]
F-7-90
4) Remove the shaft retainer [1].
- 1 screw [2]
F-7-91
5) Pick the tabs [2] of the both edges to remove the secondary transfer outer
roller [1].
[2]
[1]
[3]
[1]
[2]
[1]
[2]
[2]
[1]
[2]
[2]
[1]
[2]
Summary of Contents for Color iR C3480
