Canon Color iR C3480, Service Manual

Page: 105 / 774

Chapter 2
2-23
Select: [Additional Functions] > [System Settings] > [System Maneger
Settings], and then enter given numbers for [System Maneger ID] and
[System Password].
6) Press [Reset] to exit from [Additional Functions].
7) Turn OFF the power supply following the shutdown sequence.
2.9 Installing the Original Tray
2.9.1 Checking the Content
0013-9672
Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /
Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR
C3080i / iR C2550
<Document Tray-J1>
F-2-77
2.9.2 Installation Procedure
0013-9673
Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /
Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR
C3080i / iR C2550
1) Remove the 2 face seals [1].
F-2-78
2) Tighten 2 stepped screws (RS tightening) [1] to the upper right cover of
the host machine.
A: In the case that the card reader is not attached to the host machine
F-2-79
B: In the case that the card reader is attached to the host machine
F-2-80
3) Set the cut-offs [2] of the support plate on the document tray [1] with the
stepped screws [3].
F-2-81
Be sure that without selecting: [Initial Additional Functions] > [System
Settings] > [System Maneger Settings] and then registering [System
Maneger ID] and [System Password], 'Card Registration to the Device'
cannot be executed in the iWAM settings.
[1] Document Tray 1 pc
[2]* Washer 2 pc
[3] Stepped screw (RS tightening) 2 pc
[4]* Stepped screw (M4) 2 pc
* do not use with the host machine.
When installing the equipment, see the 'Combination Table of Accessory
Installation'.
[1]
[3] [2] [4]
[1]
[1]
[1]
[3] [1]
[2] [2]