Canon Color iR C3480, Service Manual

Page: 156 / 774

Chapter 4
4-10
*2 03 WriteAbort(start-up) 1. If possible, ask the user to make a backup of the data (address book) using the remote UI.
2. Indicate the partition in question for CHK-TYPE, and execute HDD_CHECK (several min to several 10s
of min); then, turn off and then on the main power switch.
3. If the foregoing fails, start download mode, and execute full formatting and reinstall the system software
(System, Lang, RUI); then, turn off and then on the main power switch.
*3 03 WriteAbort(start-up) Recovery on the boot partition always calls for the use of SST in safe mode:
1. Set CHK-TYPE=0, and execute HDD-CHECK (several 10s of min); then, turn off and then on the power.
2. If the foregoing fails, start download mode, and execute full formatting and reinstall the system software
(System, Lang, RUI); then, turn off and then on the main power switch.
*4 03 WriteAbort(start-up) 1. Set CHK-TYPE=0, and execute HDD-CHECK (several 10s of min); then, turn off and then on the power.
2. If the foregoing fails, use CHK-TYPE-1, 2, 3, 5 to execute HDD-CLEAR; then, turn off and then on the
power.
*5 05 file system error 1. Indicate the partition for CHK-TYPE, and execute HDD-CLEAR; then, turn off and then on the main
switch.
2. If the foregoing fails, suspect a fault on the HDD, and replace the HDD and reinstall the system software.
*6 05 file system error HDD-CLEAR cannot be executed in service mode so as to prevent inadvertent deletion of data for address
book, filter, and the like.
1. If possible, ask the user to make a backup of the data for address book using the remote UI.
2. Start in service mode, and start download mode. Execute full formatting using the SST, and reinstall the
system software (System, Lang, RUI); then, turn off and then on the main power switch.
*7 05 file system error This error seldom occurs.
1. Using CHK-TYPE=1, 2, 3, 5, execute HDD-CLEAR; then, turn off and then on the power.
2. If the foregoing fails, suspect a fault on the HDD, and replace the HDD and reinstall the system software.
*8 05 file system error Repair of the boot partition always calls for the use of the SST in safe mode.
1. Start up in safe mode, and execute full formatting using the SST and reinstall the system software (System,
Lang, RUI); then, turn off and then on the main power switch.
2. If the foregoing fails, suspect a fault on the HDD, and replace the HDD and reinstall the system software.
*9 00,01,
02,04 HDD contact fault, or v x Works
system error 1. Check the cable and power supply connectors.
2. If the foregoing fails, start up in safe mode, and execute full formatting using the SST and reinstall the
system software; then, turn off and then on the main power switch.
3. If the foregoing fails, suspect a fault on the HDD, and replace the HDD and reinstall the system software.
*10 11,21 HDD contact fault This error seldom occurs in the course of normal read/write operations.
1. Check the cable and power connectors.
2. If the foregoing fails, suspect a fault on the HDD, and replace the HDD and reinstall the system software.
*11 13,25 WriteAbort The text file on the HDD (e.g., Box) may be damaged.
1. Indicate the partition for CHK-TYPE, and execute HDD-CHECK (several min to several 10s of min); then,
turn off and then on the power.
2. If the forgoing fails, indicate the partition for CHK-TYPE, and execute HDD-CLEAR; then, turn off and
then on the main switch.
(In the case of BOOTDEV, BOOTDEV2, or APL_SEND, execute formatting using the SST and reinstall the
system software.)
3. If the foregoing fails, suspect a fault on the HDD, and replace the HDD and reinstall the system software.
YY Description Remedial action