Paper Drawers
7-6
7
Ro
utine
M
aintenanc
e
IMPORTANT
•
Paper which has been rolled or curled must be straightened out prior to use.
•
Make sure that the height of the paper stack does not exceed the loading limit mark (
) at the
back of the paper drawer.
NOTE
•
Each paper drawer holds approximately 550 sheets of paper (80 g/m
2
).
•
If there are instructions on the package of paper about which side of the paper to load, follow
those instructions.
•
When the paper is loaded into the paper drawer, the side facing down is the one printed on.
•
If problems occur, such as poor print quality or paper jams, try turning the paper stack over, and
reload it.
•
For more information on the print direction of preprinted paper (paper which has logos or
patterns already printed on it), see "Relationship between Original Orientation and Preprinted
Paper Output Chart," on p. 9-24.
5
Gently push the paper drawer back into the machine until it clicks into
place in the closed position.
CAUTION
When returning the paper drawer to its original position, be careful not to get your
fingers caught, as this may result in personal injury.
