Finisher-X1
3-21
3
Optional Eq
uipm
ent
IMPORTANT
•
The output tray moves downward as the stack of paper that is output increases in quantity and
thickness. Once the output tray has reached its stacking limit, printing and stapling stop temporarily.
Remove all of the stapled prints from the output tray, and printing and stapling resume.
•
Only the following paper sizes can be stapled: A3, A4, or A4R.
•
You cannot staple envelopes, pre-punched, transparencies, tracing paper, labels, tab paper, glossy
paper, or Washi (Japanese paper).
NOTE
•
The maximum number of sheets, including cover sheets, that can be stapled together is as follows:
- A4
50 sheets (64 to 80 g/m
2
)
30 sheets (81 to 105 g/m
2
)
2 sheets (106 to 253 g/m
2
)
- A3, A4R
30 sheets (64 to 80 g/m
2
)
20 sheets (81 to 105 g/m
2
)
2 sheets (106 to 253 g/m
2
)
•
If the machine stops while stapling and the message <Load staples.> appears, almost all of the staples
have been used, and the staple cartridge must be replaced. To proceed, replace the staple cartridge.
(See "Replacing the Staple Cartridge," on p. 7-17.)
