Specifying Common Settings
4-50
4
C
u
stom
izing Se
ttings
2
Select a Size key ([S1] to [S5]) to register or edit an irregular paper size
➞
press [Register/Edit].
NOTE
•
Size keys that already have settings stored in them are displayed with a coloured triangle (
) in
the lower right corner of the key.
•
If you select a size key that already has settings stored in it, the settings are displayed.
3
Enter the irregular paper size using the numeric keys on the touch
panel display.
❑
Press [X]
➞
enter a value.
❑
Press [Y]
➞
enter a value.
❑
Press [OK].
NOTE
•
To enter values in inches, press [Inch].
•
For instructions on entering values in inches, see "Values in Inches," on p. 2-28.
•
If you make a mistake when entering values, press [C] on the touch panel display
➞
enter the
correct values.
Naming a Size Key
1
Press
➞
[Common Settings]
➞
[Registering Irregular Size for Stack
Bypass].
2
Select a Size key ([S1] to [S5]) to name
➞
press [Register Name].
NOTE
•
Size keys that already have settings stored in them are displayed with a coloured triangle (
) in
the lower right corner of the key.
•
If you select a Size key that already has settings stored in it, the settings are displayed.
•
You can also name keys with no settings stored in them.