List of Error Messages
8-74
8
T
roub
leshoo
ting
Return page 1 to the top, and then press the Start key.
Cause
Scanning was stopped due to a problem with the optional feeder.
Remedy
Arrange the originals in page order with the first page on top. Place the originals back into the
feeder's original supply tray, and press
.
Return page 1 to the top, and then press the Start key. (Data for the scanned original has exceeded
limits on the size that can be handled by this machine. Automatically adjust settings and try again.)
Cause
Scanning was stopped because the data size of the scanned original exceeded the
maximum data size that the machine can handle.
Remedy
Try scanning the original again from the first page. If scanning is still not possible, reduce the
Sharpness mode setting, and select [Text] for the original type.
Scanning has stopped because the size of the data for the scanned original exceeds the limit. Scanning
may be possible if [Sharpness] is reduced and the type of original is set to [Text].
Cause
Scanning was stopped because the data size of the scanned original exceeded the
maximum data size that the machine can handle.
Remedy
Reduce the Sharpness mode settings, and select [Text] for the original type.
Remove the paper from the output tray.
Cause
Prints from the previous job remain in the output tray.
Remedy
Remove the prints remaining in the output tray. Printing automatically resumes.
Remove the paper from the booklet tray.
Cause
Prints from the previous job remain in the Booklet tray of the optional Saddle Finisher-W2.
Remedy
Remove the prints remaining in the Booklet tray. Printing automatically resumes.
