Canon CLC5151, Copying And Mail Box Manual

Page: 412 / 468

Making Copies with Job Done Notice (Others) 7-88
7
U
s
ing th
e
Exp
ress
C
o
p
y
Ba
sic F
eatures
Scre
en
2
Press [Set]
➞
specify the copy settings for the combined document
➞
press [OK].
If you select special features before setting the Job Block Combination mode, the selected
special features will be retained for the combined document.
For instructions on specifying copy settings and their available combinations, see Chapter 3,
"Basic Copying and Mail Box Features," Chapter 4, "Special Copying and Mail Box Features,"
and "Unavailable Combination of Functions," on p. 9-6.
3
For each batch of originals, specify the copy settings
➞
press .
For instructions on specifying copy settings and their available combinations, see Chapter 3,
"Basic Copying and Mail Box Features," Chapter 4, "Special Copying and Mail Box Features,"
and "Unavailable Combination of Functions," on p. 9-6.
If you are scanning two or more batches of originals, press [Recall Last Setting] to return to the
copy settings for the previous batch.
4
Check the settings on the Scan screen.
You can change or specify the Color Mode, 2-Sided Original, Copy Ratio, Original Type or Copy
Exposure mode before scanning the next batch of originals (i.e., between batches).
If you want to continue to scan another batch of originals without changing the copy settings,
place your originals and press
.
If you want to rescan or cancel the current batch of originals, press [Clear/Re-enter This Block]
and repeat the procedure from step 3.
If you want to change the copy modes and scan another batch of originals, press [Next Block]
and repeat the procedure from step 3.
5
When you have finished scanning all of your originals, press [Conf./
Combine All Blocks].
You can also press [Conf.Blocks] in step 3 to proceed to step 6.