OPERATING INSTRUCTIONS
Operation During Break-In
Period
Engine
A break-in period of 10 operating hours
is required before running the vehicle
at sustained full throttle.
During this period, maximum throttle
should not exceed 1/2 to 3/4 opening.
However, brief full acceleration and
speed variations contribute to a good
break-in. Continued wide open throt-
tle accelerations, prolonged cruising
speeds and engine overheating are
detrimental during the break-in period.
10-Hour Inspection
NOTE:
The 10-hour inspection is at the
expense of the vehicle owner.
We suggest that after the first 10 hours
or 400 km of operation, whichever
comes first, your vehicle be inspected
by an authorized Can-Am dealer. Re-
fer to
MAINTENANCE INFORMATION
section.
Starting the Engine
Insert key in ignition switch and turn to
ON position.
vmo2008-018-012_b
1. ON “with light”
2. ON “without light”
Place engine stop switch to RUN posi-
tion.
vmo2008-018-021_e
Shift transmission to NEUTRAL posi-
tion or press and hold clutch lever.
vmo2008-011-019_c
68
______________________
Summary of Contents for 2009 DS 450
