Can-Am 2009 DS 450 Operator'S Manual Download | Manualshive

Page: 22 / 152

background image

OPERATION WARNINGS

WARNING

POTENTIAL HAZARD

Riding on frozen waterways.

WHAT CAN HAPPEN

Breaking through the ice can lead to severe injury or death.

HOW TO AVOID THE HAZARD

Never ride this vehicle on a frozen surface before you are sure the ice is thick
enough and sound enough to support the vehicle and its load, as well as the
force that is created by a moving vehicle.

WARNING

V00A0BQ

POTENTIAL HAZARD

Removing hands from handlebar or feet from the footrests during opera-
tion.

WHAT CAN HAPPEN

Removing even one hand or foot can reduce your ability to control the vehi-
cle or could cause you to lose your balance and fall off the vehicle. If you re-
move a foot from the footrests, your foot or leg may come into contact with
the rear wheels, which could injure you or cause an accident.

HOW TO AVOID THE HAZARD

Always keep both hands on the handlebar and both feet on the footrests
during vehicle operation.

20

___________

SAFETY INFORMATION

____________

«
...
20
21
22
23
24
...
»

Summary of Contents for 2009 DS 450

























































































































































Reviews:

No comments

Related manuals for 2009 DS 450

Turbo-Max 6100 Series

Brand: SAC Pages: 66

Brand: Lynx Pages: 75

Brand: Chongqing Astronautic Bashan Motorcycle Manufacturing Pages: 16

Brand: Arctic Cat Pages: 72

Brand: Etnyre Pages: 42

Brand: Can-Am Pages: 127

Brand: Ultra-tow Pages: 15

Brand: Tomberlin Pages: 142

Brand: Labrie Pages: 62

Brand: Eagle Pages: 53

eXtreme Sport ES150IIR

Brand: Hammerhead Pages: 67

Brand: Kellfri Pages: 16

Brand: Yamaha Pages: 311

Brand: Yamaha Pages: 134

Brand: Land Pride Pages: 96

Brand: Panther Pages: 10

Brand: Baja Pages: 57

Brand: Hammerhead Pages: 55

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands