Can-Am 2009 DS 450 Operator'S Manual Download Page 141 | Manualshive

Page: 141 / 152

background image

BRP LIMITED WARRANTY FOR THE EUROPEAN
ECONOMIC AREA: 2009 CAN-AM

TM

ATV

1) SCOPE OF THE LIMITED WARRANTY

Bombardier Recreational Product Inc. (“BRP”)* warrants its new and unused
model-year 2009 Can-Am ATVs sold by authorized BRP distributors/dealers
(“Distributors/Dealers”) in the states members of the European Economic Area
("EEA") (which is comprised of the states member of the European Union plus
Norway, Iceland and Liechtenstein) from defects in material or workmanship for
the period and under the conditions described below.

All genuine Can-Am ATV parts and accessories, installed by an authorized BRP
Distributors/Dealers at the time of delivery of the 2009 Can-Am ATV, carry the
same warranty as that of the ATV.

This limited warranty will become null and void if:

1. The ATV was used for racing or any other competitive activity, at any point, even

by a previous owner; or

2. The ATV has been altered or modified in such a way so as to adversely affect its

operation, performance or durability, or has been altered or modified to change
its intended use.

2) LIMITATIONS OF LIABILITY

THIS WARRANTY IS EXPRESSLY GIVEN AND ACCEPTED IN LIEU OF ANY
AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT THAT THEY
CANNOT BE DISCLAIMED, THE IMPLIED WARRANTIES ARE LIMITED IN
DURATION TO THE LIFE OF THE EXPRESS WARRANTIES. INCIDENTAL
AND CONSEQUENTIAL DAMAGES ARE EXCLUDED FROM COVERAGE
UNDER THIS WARRANTY. SOME JURISDICTIONS DO NOT ALLOW FOR
THE DISCLAIMERS, LIMITATIONS AND EXCLUSIONS IDENTIFIED ABOVE,
AS A RESULT, THEY MAY NOT APPLY TO YOU. THIS WARRANTY GIVES
YOU SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS
WHICH MAY VARY FROM COUNTRY TO COUNTRY.

Neither the distributor, any BRP Distributor/Dealer nor any other person has been
authorized to make any affirmation, representation or warranty regarding the prod-
uct, other than those contained in this limited warranty, and if made, shall not be
enforceable against BRP.

BRP reserves the right to modify this warranty at any time, being understood that
such modification will not alter the warranty conditions applicable to the products
sold while this warranty is in effect.

3) EXCLUSIONS – ARE NOT WARRANTED

The following are not warranted under any circumstances:

– Normal wear and tear;
– Routine maintenance items, tune ups, adjustments;

_____________________

139

«
...
139
140
141
142
143
...
»

Summary of Contents for 2009 DS 450

























































































































































Reviews:

No comments

Related manuals for 2009 DS 450

Brand: Aeon Pages: 126

Brand: Taylor-Dunn Pages: 144

Brand: Bosch Pages: 2

Brand: Baja motorsports Pages: 69

RS Venture RST90A

Brand: Yamaha Pages: 140

Brand: Yamaha Pages: 122

Brand: Yamaha Pages: 127

Brand: Yamaha Pages: 134

Brand: Yamaha Pages: 130

Brand: Yamaha Pages: 163

Brand: Yamaha Pages: 142

Raptor YFM7RSEZ

Brand: Yamaha Pages: 154

Brand: Yamaha Pages: 146

Brand: Yamaha Pages: 158

Brand: Yamaha Pages: 176

Raptor 700R YFM70RSPX

Brand: Yamaha Pages: 158

Raptor 700R YFM70RSEW

Brand: Yamaha Pages: 158

Raptor 250 YFM25RX

Brand: Yamaha Pages: 148

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands