manualshive.com logo in svg

Campbell LoggerNet, Instruction Manual, Page: 315 / 580

Share
Download
Campbell LoggerNet Instruction Manual Download Page 315

Section 8.  Working with Data Files on the PC 

and drag the cursor across the graph.  Data values at the current cursor position 
will be shown in the table to the right of the graph. 

 

8.1.7.1.5  Line Graph Toolbar 

The Line Graph toolbar includes the following icons: 

 

Statistics

. Displays statistics for each trace including Average, 

Standard Deviation, Minimum and Maximum. Note that these 
statistics are for the data displayed in the graph. They are not 
statistics for the entire column(s) of data.  Note that an asterisk 
next to a statistics value indicates that the trace contains one or 
more bad data values (i.e., NAN, INF, etc.).   

The Statistics button is disabled when a graph is in a zoomed 
stated.

 

 

Copy to Clipboard

. Places the graphic on the Windows 

clipboard. It can then be pasted into other applications.

 

 

Print

. Prints the graph. Print options can be set before printing 

begins.

 

8-17 

Summary of Contents for LoggerNet





































































































































































































































































































































































































































































































































































































Reviews:

No comments