Campbell LoggerNet Instruction Manual Download Page 161

Page: 161 / 580

Section 5. Real-Time Tools

Plot NAN as value

– With this option is selected, each NAN value in the data

will be represented by the specified value.

Configuration Tab

The Configuration tab of the Graph Display Options dialog box is used to Save
or Load graph configurations.

Save Config

– Saves the graph configuration to a file that can be loaded in the

future.

Load Config

– Loads a previously saved graph configuration file.

5.1.7.3.3 Trace Options

The appearance of the data traces can only be changed by selecting a cell and
pressing the right mouse button. A floating menu will be displayed.

Select Trace Options to display the Trace Options dialog box:

5-25

Summary of Contents for LoggerNet





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LoggerNet

Reviews:

Campbell LoggerNet, Instruction Manual, Page: 161 / 580

Search results

Summary of Contents for LoggerNet

Reviews: