Camera EOS 20D Digital Instruction Manual Download Page 62

Page: 62 / 85

Printing with PictBridge

122

Start printing.

Turn the <

> dial to select [

Print

then press <

The printing will start.

When the printing ends, the screen
will return to step 1.

To stop the printing, press <

> while

[

Stop

] is displayed, then turn the

> dial to select [

] and press

Depending on the image’s ﬁle size and recording quality, it may take
some time for the printing to start after you select [

Print

The [

Default

] setting for printing effects and other options are the

printer’s own default settings as set by the printer’s manufacturer. See
the printer’s instruction manual to ﬁnd out what the [

Default

] settings are.

Handling Printer Errors

If you resolve a printer error (no ink, no paper, etc.) and select [

Continue

] to

resume printing but it does not resume, operate the buttons on the printer to
resume printing. For details, see the printer’s instruction manual.

Error Messages

If a problem occurs during printing, an error message will appear on the
camera’s LCD monitor. Press <

> to stop printing. After resolving the

problem, resume printing. For details on how to resolve a printing problem,
refer to the printer’s instruction manual.

Paper Error

Check whether the paper is properly loaded in the printer.

Ink Error

The printer has run out of ink or the waste ink tank is full.

Hardware Error

Check for any printer problems other than paper and ink problems.

File Error

You attempted to print an image that cannot be printed with PictBridge.
Images taken with a different camera or images edited with a computer
might not be printable.

123

Select the image to be printed.

Check that the <

> icon is displayed

on the upper left of the LCD monitor.

Turn the <

> dial to select the

image to be printed.

Press <

The print setting screen will appear.

Select [Style].

Turn the <

> dial to select [

Style

then press <

The Style screen will appear.

Printing with CP Direct

Printer connected icon

Print setting screen

Trimming frame: Appears when you want to trim the image.

Sets the quantity to be printed.
Sets the trimming area.
Sets the printing style.
Returns to step 1.
Starts the printing.

The printing style settings are displayed. <

> is the date icon.

Summary of Contents for EOS 20D Digital






















































































Search results

Summary of Contents for EOS 20D Digital

Reviews:

Related manuals for EOS 20D Digital

Brands by name

Popular brands

Camera EOS 20D Digital, Instruction Manual

Search results

Summary of Contents for EOS 20D Digital

Reviews:

Related manuals for EOS 20D Digital

Brands by name

Popular brands