Camera EOS 20D Digital Instruction Manual Download Page 49 | Manualshive

Page: 49 / 85

background image

Using the Built-in Flash

96

In the same way as normal exposure compensation, you can set
exposure compensation for ﬂash. You can set ﬂash exposure
compensation up to ±2 stops in 1/3-stop increments.

1

Press the <

Q

> button.

(

9

)

2

Set the exposure compensation
amount.

¡

Set the <

4

> switch to <

J

>, and

while looking at the LCD panel or
viewﬁnder, turn the <

5

> dial.

¡

To cancel the ﬂash exposure
compensation, set the exposure
compensation amount back to <

E

>.

3

Take the picture.

y

Flash exposure compensation

N

Increased exposure

Decreased exposure

Standard exposure index

Increased
exposure

Decreased

exposure

Exposure level

mark

¡

The exposure compensation amount will remain in effect even after the
<

4

> switch is set to <

2

>.

¡

The procedure is the same with EX-series Speedlites. The ﬂash
exposure compensation amount can be set with the camera.

97

An EOS-dedicated, EX-series Speedlite makes ﬂash photography as
easy as normal shooting. You can easily do the ﬂash operations below.
For detailed procedures, see the Speedlite’s instruction manual.

¡

¡

¡

¡

E-TTL II Autoﬂash

E-TTL II is a new autoﬂash exposure system incorporating improved ﬂash
exposure control and lens focusing distance information, making it more
precise than the previous E-TTL (evaluative ﬂash metering with preﬂash)
system. The camera can execute E-TTL II autoﬂash with any EX-series
Speedlite.

• High-speed sync (FP ﬂash)

With high-speed sync, you can set a sync speed faster than 1/250 sec.

• FE (Flash Exposure) Lock

Press the camera’s <

A

> button to lock the ﬂash exposure at the desired part

of the subject.

• Flash exposure compensation

In the same way as normal exposure compensation, you can set exposure
compensation for ﬂash. Set ﬂash exposure compensation up to ±3 stops in 1/3-
stop increments.

• FEB (Flash Exposure Bracketing)

The ﬂash output is changed automatically for three successive shots (only with
FEB-compatible Speedlites). Set ﬂash exposure bracketing up to ±3 stops in 1/
3-stop increments.

• E-TTL II wireless autoﬂash with multiple Speedlites

As with wired, multiple Speedlites, wireless E-TTL II autoﬂash with multiple
Speedlites provides all the above features. Since connection cords are
unnecessary, ﬂexible and sophisticated lighting setups are possible (only with
wireless-compatible Speedlites).

The ﬂash cannot be ﬁred with an EZ-, E-, EG-, ML-, or TL-series
Speedlite set in the TTL or A-TTL autoﬂash mode.

Use the

Speedlite’s manual ﬂash mode instead if provided.

Using EOS-Dedicated, External Speedlites

With EX-series Speedlites

About EZ/E/EG/ML/TL-series Speedlites

«
...
47
48
49
50
51
...
»

Summary of Contents for EOS 20D Digital






















































































Reviews:

No comments

Related manuals for EOS 20D Digital

Brand: Olympus Pages: 73

Brand: Olympus Pages: 74

Brand: Canon Pages: 43

Powershot SD1100 IS

Brand: Canon Pages: 227

PowerShot SD950 IS Digital ELPH

Brand: Canon Pages: 427

STYLUS TOUGH-8000

Brand: Olympus Pages: 86

WVC54GC - Wireless-G Compact Internet Video Camera Network

Brand: Linksys Pages: 92

smc Pentax-D FA Macro 100mm f/2.8

Brand: Pentax Pages: 12

Brand: EchoMaster Pro Pages: 4

Brand: FujiFilm Pages: 67

Brand: Quanmax Pages: 38

ARTCAM-185IMX-HD3

Brand: ARTRAY Pages: 14

Brand: Air Live Pages: 77

Brand: Astrel Instruments Pages: 21

Brand: Exakta Pages: 1

Brand: FLIR Pages: 2

Brand: Pilot Electronics Pages: 6

PAR-ALLBIRA650D

Brand: InVid Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands