Camera EOS 20D Digital Instruction Manual Download Page 9

Page: 9 / 85

In this manual, the icons and markings indicating the camera’s
buttons, dials, and settings correspond to the icons and markings on
the camera.

For more information, reference page numbers are provided in
parentheses (p.**).

The asterisk

on the right of the page title indicates that the

respective feature is available only in Creative Zone modes (

The Canon EF-S17-85mm f/4-5.6 IS USM lens is used as the sample
lens in this Instruction Manual.

The procedures assume that the menu settings and Custom
Functions are set to the default settings.

The

icon indicates that the setting can be changed with the menu.

(

), (

) or (

) indicates that the respective function remains active

for 4 sec., 6 sec., or 16 sec. respectively after you let go of the button.

This manual uses the following alert symbols:

: The Caution symbol indicates a warning to prevent shooting problems.

: The Note symbol gives supplemental information.

Conventions Used in this Manual

In the text, the <

> icon indicates the power switch.

All operations described in this manual assume that
the <

> switch is set to <

> or <

The <

> icon indicates the Main Dial.

The <

> icon indicates the Quick Control Dial.

Operations with the <

> dial assume that the <

switch is already set to <

>. Be sure it is set to

In the text, the <

> icon indicates the Multi-controller.

In the text, the <

> icon indicates the SET button.It is

used for menu functions and Custom Functions.

9
0

Getting Started

This chapter explains a few preliminary steps and basic
camera operations.

Attaching the Strap

Pass the end of the strap through
the camera’s strap mount from the
bottom. Then pass it through the
strap’s buckle as shown in the
illustration. Pull the strap to take up
any slack and make sure the strap
will not loosen from the buckle.

The eyepiece cover is also
attached to the strap. (p.89)

Eyepiece cover

Summary of Contents for EOS 20D Digital






















































































Search results

Summary of Contents for EOS 20D Digital

Reviews:

Related manuals for EOS 20D Digital

Brands by name

Popular brands

Camera EOS 20D Digital, Instruction Manual

Search results

Summary of Contents for EOS 20D Digital

Reviews:

Related manuals for EOS 20D Digital

Brands by name

Popular brands