Camera EOS 20D Digital Instruction Manual Download Page 52

Page: 52 / 85

102

You can adjust the brightness of the LCD monitor to one of ﬁve levels.

Select [LCD Brightness].

Turn the <

> dial to select [

LCD

Brightness

], then press <

The brightness adjustment screen will
appear.

Adjust the brightness.

While looking at the gray chart on the
left, turn the <

> dial to adjust.

Press <

> to exit the setting and

return to the menu.

Setting the LCD Brightness

To check the image’s exposure, look at the histogram (p.104).

103

You can select any captured image to view. You can view a single
image, the shooting information, an index display, or a magniﬁed view.

Playback the image.

Press the <

> button.

The last captured image will appear
on the LCD monitor.

Select the image.

To playback images starting with the
last image, turn the dial
counterclockwise. To playback
images starting with the ﬁrst captured
image, turn the <

> dial clockwise.

Press the <

> button to switch

the display format.

To quit the playback, press the <

button. The LCD monitor will turn off.

Image Playback

Single image display

Single image display

(with basic info)

Shooting information

Single image display

(no shooting info)

Even in display formats other than single image (index display, magniﬁed view,
etc.), you can press the <

> button to display or hide the basic info.

While data is being written to the CF card (access lamp blinking) after
continuous shooting, press the <

> button to display the last image

which has been written to the CF card. Turn the <

> dial to select the

image. After all the images have been written to the CF card, they can be
displayed in sequence.

Summary of Contents for EOS 20D Digital






















































































Search results

Summary of Contents for EOS 20D Digital

Reviews:

Related manuals for EOS 20D Digital

Brands by name

Popular brands

Camera EOS 20D Digital, Instruction Manual

Search results

Summary of Contents for EOS 20D Digital

Reviews:

Related manuals for EOS 20D Digital

Brands by name

Popular brands