P
age
52
- Manual
FA01894-EN
- 09/2022 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
DISPLAY WARNINGS KEY
The [Impact test] function is on.
The operator detected an obstacle during closing.
The operator detected an obstacle during opening.
2
The operator detected two obstacles during closing.
The number on the display varies according to the number of obstructions detected.
When the maximum number of detected obstructions has been reached, the
operator stops and an error message shows on the display.
2
The operator detected two obstacles during opening.
The number on the display varies according to the number of obstructions detected.
When the maximum number of detected obstructions has been reached, the
operator stops and an error message shows on the display.
There is at least one programmed timer.
A programmed timer is running.
With the timer programmed for opening or partial opening, any given radio
command will always allow opening. The wired commands continue to operate
normally.
C<n>
Wired safety device active
The <n> value is associated with the selected parameter for the functions [CX
input] [CY input] [CK input] [CZ input].
r7
R7 safety device (sensitive edge) active
r8
R8 safety device (sensitive edge) active
2r7
R7 safety device (pair of sensitive edges) active
2r8
R8 safety device (pair of sensitive edges) active
c<n>
BUS photocell safety device active
The <n> value is associated with the selected parameter for the [BUS photocell]
functions.
c23
Open command active for BUS photocells
c24
Close command active for BUS photocells
C0
Total stop active
