P
age
45
- Manual
FA01894-EN
- 09/2022 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
New user
Register up to a maximum of 1000 users and assign a function to each one.
The operation can be carried out by using a transmitter or a BUS selector device (e.g. a keypad or transponder
reader). The board that manages the control devices (AF) must be inserted into the connector.
Manage users
New user
Choose the function to be assigned to the user.
Step-by-step - The fi rst command is to open and the
second to close.
Sequential - The fi rst command is to open, the second to
STOP, the third to close and the fourth to STOP.
Open
Partial opening
B1-B2 output
BUS 1 module relay - Activate output 2 (relay output) on
BUS 1 I/O module
BUS 2 module relay - Activate output 2 (relay output) on
BUS 2 I/O module
Press ENTER to confi rm.
You will be asked to enter your user code. Send the code
from the control device.
Repeat the procedure to add other users.
Remove user
Remove one of the registered users.
Manage users
Remove user
Use the arrows to choose the number associated with the
user you want to remove.
Alternatively, you can select a user by sending a
command from the associated device.
Press ENTER to confi rm
Confi rm? NO
Confi rm? YES
Remove all
Remove all registered users.
Manage users
Remove all
Confi rm? NO
Confi rm? YES
