P
age
42
- Manual
FA01894-EN
- 09/2022 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
Thrust
Before every opening or closing manoeuvre, the leaves thrust inwards to release the electric lock.
The thrust motion is performed during opening or closing, depending on where the electric lock is active. See
Function [Lock].
Confi guration>
Functions
Thrust
Deactivated (Default)
On
Removing obstacles
If the function is active, when the operator detects an obstacle via the AST control on the control board or via the sensitive
edge, the leaf movement inverts to create the space required to free the obstacle and then stops.
Confi guration>
Functions
Removing obstacles
Deactivated (Default)
On
B1-B2 output
Confi gure the contact.
Confi guration>
Functions
B1-B2 output
Bistable
Monostable: on from 1 to 180 seconds (Default 1)
Hold-to-run
With the function active, the operator stops moving (opening or closing) when the control device is released.
When the function is active, it excludes all other control devices.
Confi guration>
Functions
Hold-to-run
Deactivated (Default)
On
Obstacle with motor stopped
With the function active, the gate remains idle if the safety devices detect an obstacle. The function is active when the gate is
closed, open or after a complete stop.
Confi guration>
Functions
Obst. with motor stopped
Deactivated (Default)
On
Automatic closure
Set the time before automatic closure, once the opening travel end point has been reached or once the photocells have
caused a partial stop [C3].
The function does not work if any of the safety devices are triggered when an obstacle is detected, after a
complete stop, during a power outage or if there is an error.
Confi guration>
Times
Automatic close
Deactivated (Default)
From 1 to 180 seconds
