P
age
46
- Manual
FA01894-EN
- 09/2022 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
Radio decoding
Choose the type of radio coding for the transmitters enabled to control the operator.
If you choose the type of radio coding for the transmitters [Rolling code] or [TW key block], any transmitters
saved previously will be deleted.
Manage users
Radio decoding
All decodings
Rolling code
TW Key block
Confi rm? NO
Confi rm? YES
Self-Learning Rolling
Save a new rolling code transmitter by activating acquisition from a rolling code transmitter that has already been saved. The
saving and acquisition procedures are explained in the transmitter manual.
Manage users
Self-Learning Rolling
Deactivated (Default)
On
Change mode
Change the function assigned to a specifi c user.
Manage users
Change mode
Use the arrows to choose the number associated with the
user to be changed.
Alternatively, you can select a user by sending a
command from the associated device.
Press ENTER to confi rm.
Choose the command to associate with the user.
Step-by-step - The fi rst command is to open and the
second to close.
Sequential - The fi rst command is to open, the second to
STOP, the third to close and the fourth to STOP.
Open
Partial opening
B1-B2 output
BUS 1 module relay - Activate output 2 (relay output) on
BUS 1 I/O module
BUS 2 module relay - Activate output 2 (relay output) on
BUS 2 I/O module
Press ENTER to confi rm.
Confi rm? NO
Confi rm? YES
