![background image](http://html.mh-extra.com/html/cambium/ptp-670-series/ptp-670-series_user-manual_485665430.webp)
Chapter 6: Configuration and alignment
Management menu
Page 6-71
Procedure:
•
Review and update the attributes (
•
To save changes, click Submit Updated Configuration.
Table 172 Web-Based Management attributes
Attribute
Meaning
HTTPS Access
Enabled
Only displayed when HTTPS is configured.
No: The unit will not respond to any requests on the HTTPS port.
Yes: The unit will respond to requests on the HTTPS port.
HTTPS Port Number Only displayed when HTTPS is configured. The port number for HTTPS
access. A value of zero means the wireless unit uses the default port.
HTTP Access
Enabled
No: The unit will not respond to any requests on the HTTP port.
Yes: The unit will respond to requests on the HTTP port.
Remote management via HTTPS is not affected by this setting.
HTTP Port Number
The port number for HTTP access. A value of zero means the wireless
unit uses the default port.
Telnet Access
Enabled
No: The unit will not respond to any requests on the Telnet port.
Yes: The unit will respond to requests on the Telnet port.
Telnet Port Number The port number for Telnet access. A value of zero means the wireless
unit uses the default port.
Access Control
Enables or disables access control to web-based management by
Internet Address.
Access Control
Internet Address
1/2/3
A list of up to three IPv4 or IPv6 Addresses permitted to perform web-
based management.
Only displayed when Access Control is set to Enabled.
SNMP Control of
HTTP And Telnet
Disabled: Neither HTTP nor Telnet can be controlled remotely via SNMP.
Enabled: Both HTTP and Telnet can be controlled remotely via SNMP.
SNMP Control of
Passwords
Enabled: Passwords for identity-based user accounts in the web-based
interface can be updated via SNMP. This option can be used together
with SNMPv3 to provide a secure means to update passwords from a
central network manager.
Disabled: Passwords for identity-based user accounts can be updated
only via the web-based interface (default).
TFTP Client
Disabled: The unit will not respond to any TFTP software download
requests.
Enabled: Software can be downloaded via TFTP, as described in
on page
Debug Access
Enabled
Yes: Cambium Technical Support is allowed to access the system to
investigate faults.