Cambium PTP 670 Series, User Manual

Page: 418 / 594

Chapter 6: Configuration and alignment System menu
Page 6-59
Table 166 QoS Configuration attributes – Data Service
Attribute Meaning
Bridge
MRP
CFM
R-APS
EAPS
PPPoE Discovery
The classification of each layer 2 control protocol (L2CP) to an egress
queue at the wireless port.
Data Priority
Scheme Ethernet: Classification is based on fields in the Ethernet header (Layer
2).
IP/MPLS: Classification is based on fields in the network header (Layer
3). IP includes IPv4 and IPv6.
Unknown
Protocol Only displayed when Priority Scheme is IP/MPLS.
The classification of unknown network protocols (that is, not IP or
MPLS) to an egress queue at the wireless port.
Ethernet Priority Ethernet priority mapping to Queue
Table 167 QoS Configuration attributes – Second Data Service
Attribute Meaning
Queue Set a priority egress queue for Second Data Service traffic classification
Table 168 QoS Configuration attributes –Out-of-Band Managment Service
Attribute Meaning
Queue Only displayed when one ODU port is allocated to Out-of-Band
Management and Second Data Service port is not allocated
(
Configuring port allocations on page 6-23 ).
The classification of out-of-band management traffic to an egress
queue at the wireless port.
SFP Configuration page
Menu option: System > Configuration > SFP Configuration.
This page is only available when the ODU detects an optical (
Figure 158 ) or copper ( Figure 159 )
SFP module in the SFP port. Use it to configure the way in which the unit connects to the
network via the SFP interface.