Chapter 5: Installation
Installing the ODU and top LPU
Page 5-8
3 Thread two of the nuts to the long bolts and tighten against the bracket body using a 13 mm
spanner. Fit the bracket strap and thread the remaining nuts onto the long bolts.
4 Fix the assembled bracket body to the pole, adjust the azimuth angle, and tighten the nuts to a
torque setting of 10.0 Nm (7.4 lb ft) using a 13 mm spanner, ensuring that the arrow in the body
is pointing upwards.
5 Hoist the ODU to the mounting position. Fit the mounting plate to the bracket body by
positioning the open-ended slots over the short bolts. Insert the remaining short bolts through
the longer curved slots into the threaded holes in the bracket body. Adjust the elevation angle,
and tighten the bolts to a torque setting of 5.0 Nm (3.7 lb ft) using a 13 mm spanner or socket.
Tilt Bracket Assembly with band clamps
1 Follow Step 1 for the Tilt Bracket Assembly procedure above.
1
2
3
4
5
