Cambium PTP 670 Series, User Manual

Page: 409 / 594

Chapter 6: Configuration and alignment System menu
Page 6-50
Procedure:
1 Review and update the attributes: IP Interface ( Table 160 ); Main PSU or Aux Port ( Table 161 );
Bridging ( Table 163 ).
2 To save changes, click Submit Updated System Configuration. The system may reboot.
3 If Main PSU Port is selected for Data Service only (and not for Management Service), connect
management PC to the port (Aux or SFP) that was selected for Management or Local
Management Service
4 If IP Address, Subnet Mask or Gateway IP Address have been changed, reconfigure the local
management PC to use an IP address that is valid for the network. Refer to Configuring the
management PC on page 6-4 .
5 If IP Address has been changed, use the new IP address to log into the unit.
Table 160 IP interface attributes
Attribute Meaning
IP Version Defined in Table 153 .
IPv4 Address Defined in Table 153 .
Subnet Mask Defined in Table 153 .
Gateway IP Address Defined in Table 153 .
IPv6 Address Defined in Table 153 .
IPv6 Prefix Length Defined in Table 153 .
IPv6 Gateway Address Defined in Table 153 .
IPv6 Auto Configured
Link Local Address Defined in Table 153 .
Use VLAN For
Management
Interfaces Defined in Table 153 .
VLAN Management
VID Defined in Table 153 .
VLAN Management
Priority Defined in Table 153 .
DSCP Management
Priority Defined in Table 153 .
Data Service Defined in Table 153 . For more help, see Ethernet port allocation
for PTP topology on page 3-37 and Ethernet port allocation for
HCMP topology on page 3-46 .
Second Data Service Defined in Table 153 . For more help, see Ethernet port allocation
for PTP topology on page 3-37 .
Management Service
Defined in Table 153 . For more help, see Ethernet port allocation
for PTP topology on page 3-37 and Ethernet port allocation for
HCMP topology on page 3-46 .