
Chapter 6: Configuration and alignment
Installation menu
Page 6-28
Attribute
Meaning
Max Receive
Modulation Mode
The maximum mode the unit will use as its adaptive modulation. By
default the Max Receive Modulation Mode is the highest mode available.
For minimum error rates, set the maximum modulation mode to the
minimum necessary to carry the required traffic.
Lowest Data
Modulation Mode
The lowest modulation mode that must be achieved before the link is
allowed to bridge customer data Ethernet frames. This does not affect the
bridging of management data: if out-of-band remote management is
enabled, this will continue regardless of modulation mode.
Lowest Second Data
Modulation Mode
The lowest modulation mode that must be achieved before the link is
allowed to bridge Ethernet frames in the Second Data Service. This
attribute is displayed when the Second Data Service is enabled.
Link Mode
Optimization
IP Traffic: The link is optimized for IP traffic to provide the maximum
possible link capacity.
TDM Traffic: The link is optimized for TDM traffic to provide the lowest
possible latency. This is the only available setting when TDM is enabled
(
).
TDD
Synchronization
Mode
Disabled: The link does not employ TDD synchronization.
Enabled: The link employs TDD synchronization. This is configured in the
Installation Wizard; see
TDD synchronization page (optional)
For a basic description, see
When TDD Synchronization Mode is set to Enabled, the following
restrictions apply:
•
Ranging Mode is Disabled
•
Target Range is Disabled
In PTP topology, Link Symmetry is limited to 1 to 1.
Regulatory Band
The regulatory band selected from the list in the license key.
Connectorized
Antenna Type
Only displayed in the HCMP topology, and only when the Regulatory
Band applies different limits for PTP and PMP operation.
Select one of the following for an HCMP Master:
•
60 degrees sector
•
90 degrees sector
•
120 degrees sector
•
Omni-directional
•
Other
Channel Bandwidth
Bandwidth of the transmit and receive radio channels.