Chapter 1: Product description
Overview of the PTP 670 Series
Page 1-4
Note
The supported frequency coverage may be further restricted in some country licenses to
comply with the applicable regulations.
Typical bridge deployment
The PTP 670 is an “all outdoor” solution consisting of a wireless bridge between two sites.
Each site installation consists of a PTP 670 Integrated or PTP 670 Connectorized outdoor unit
(ODU), and a power injector (PSU) (
). The ODU provides the following interfaces:
•
PSU port: This provides proprietary power over Ethernet and connection to the
management and/or data networks via 100BASE-TX or 1000BASE-T Ethernet. In the basic
configuration, this is the only Ethernet connection to the ODU.
•
SFP port: This provides an optical or copper Gigabit Ethernet interface for customer data
and/or network management.
•
Aux port: This provides an optional power and 100BASE-TX or 1000BASE-T Ethernet
connection to an IEEE803.2at device such as a video camera or wireless access point.
Figure 1 PTP 670 typical bridge deployment
Building 1
ODU
AC supply
PSU
Out-of-band
local
management
Auxiliary
equipment
Network
equipment
Building 2
ODU
PSU
Network
equipment
AC supply
Power over Ethernet
interface
Optical or copper SFP
Ethernet interface to
connected device
(not powered)
Ethernet interface
(with optional
power) to auxiliary
device
Lightning
protection units
