Chapter 3: Cable Installation and Grounding
Connecting the Ethernet Cable
phn-3962 004v000
Page 3-32
46B
6
Trim all wires to the same length. About 12 mm on the left must be exposed from the inner
sheath.
47B
7
Separate the wires and place the twisted shield between the separated wires.
48B
8
Insert the wires into the RJ45 plug. Verify that each wire is fully inserted into the front of the
RJ45 plug and in the correct order according to the pinouts shown in
. The sheath of the Ethernet cable must extend into the plug by about 13 mm
and held in place by the crimp.
49B
9
Extend the cable jacket with the shield into the connector about 5 mm for strain relief and
shielding connection.