Cambium Networks PTP 800 Series, User Manual

Page: 634 / 648

Connect ing t o t he web m anagem ent int erface Chapt er 8: Troubleshoot ing
8- 4 phn- 2513_004v000 ( Oct 2012)
Check the Management port Ethernet connection
Check the state of the Management port indicators and take action as described in Table
266 .
Ta ble 2 6 6 M a n a ge m e n t p or t in dica t or ch e ck s
M a n a ge m e n t
por t in d ica t or
st a t e Lik e ly ca u se a n d a ct ion
Yellow steady The Ethernet link is up but is not carrying traffic. Continue at
Check IP network connection on page 8-7 .
Yellow blink The Ethernet link is up and is carrying traffic. Continue at Check
IP network connection on page 8-7 .
Off The Ethernet link is down. Continue at Management port
indicator is off on page 8-4 .
Management port indicator is off
If the Management port indicator is off, it means that the Ethernet link is down.
If the CMU Management port is connected to a management network, check the following:
•
The associated network equipment (workstation, PC, router, switch etc.) is powered up
and operating correctly.
•
The Ethernet port in the associated equipment is enabled.
•
The Ethernet cable between the CMU and the network equipment is connected and is
not damaged. If possible, substitute a known good Ethernet cable.
•
The Ethernet ports have compatible auto negotiation and duplex settings as described
in
Configuring the IP interface and management mode on page 6-10 .
If the CMU Management port is connected directly to a PC, check the following:
•
The Ethernet port in the PC is enabled.
•
The Ethernet cable between the CMU and the PC is connected and is not damaged. If
possible, substitute a known good Ethernet cable.
•
The Ethernet ports have compatible auto negotiation and duplex settings as described
in
Configuring the IP interface and management mode on page 6-10 .
If these steps fail to resolve the problem, continue at Using recovery mode on page 7-71 ,
selecting the option to reset IP and Ethernet configuration.