Cambium Networks PTP 800 Series, User Manual

Page: 480 / 648

Task 5: Configuring securit y Chapt er 6: Configurat ion and alignm ent
6- 52 phn- 2513_004v000 ( Oct 2012)
Ta ble 2 3 0 RADI US Aut hent icat ion at t ribut es
At t r ibu t e M e a n in g
RADIUS Client
Enabled ‘Enabled’ means that PTP 800 users may be authenticated via
the RADIUS servers.
‘Disabled’ may only be selected if at least one user with Security
Officer privileges exists.
RADIUS Primary
Server Specifies the primary server, determining the order in which the
servers are tried.
RADIUS Primary
Server Dead Time Time (in minutes) to hold off trying to communicate with a
previously unavailable RADIUS server. Setting the value to zero
disables the timer.
RADIUS Server
Retries Number of times the PTP 800 will retry after a RADIUS server
fails to respond to an initial request.
RADIUS Server
Timeout Time (in seconds) the PTP 800 will wait for a response from a
RADIUS server.
Authentication
Method Method used by RADIUS to authenticate users.
Authentication Server 1 and 2:
RADIUS Server
Status The status of the RADIUS server. This contains the time of the
last test and an indication of success or failure.
If the Authentication Server attributes are incorrect, the
displayed status is ‘server config not valid’.
RADIUS Server IP
Address IP address of the RADIUS server.
RADIUS Server
Authentication
Port Network port used by RADIUS server for authentication
services.
RADIUS Server
Shared Secret Shared secret used in RADIUS server communications. May
contain alphabetic, numeric, special characters or spaces, but
not extended unicode characters. The maximum length is 127
characters.
RADIUS Server
Shared Secret
Confirm Shared secret confirmation.