Cablescan 512, Instruction Manual

Page: 11 / 95

Model 512 Instruction Manual Page 2
FRONT PANEL CONTROLS AND DISPLAY
All modes and functions of the Model 512 are controlled by keys on the front panel. Five modes
are selected by individual keys, and 19 menu modes and functions are selected through Up and
Down keys and executed by the Menu Run Key. See Figure 1, below.
SEQ
BUILD
RANDOM
BUILD
ERROR
LIST
TEST RESET
MENU
RUN
MODEL 512
SEQ BUILD - Initiates circuit assembly in step-by-step sequence per wire list arrangement
in memory. The assembly sequence is programmed using the Wire List
Editor.
RANDOM
BUILD - Initiates circuit assembly in random by displaying circuit information
(termination) as each wire is touched while the wrist strap is attached.
Program can be created with the Learn-Known-Good mode or entered using
the Wire List Editor.
ERROR LIST - Initiates test and produces a printout of errors, or prints "Passed" if no
errors.
TEST - Initiates test and displays errors.
RESET - Terminates current mode and places Model 512 in "wait" state until next
mode selection is made.
UP/DOWN
ARROWS - Used for stepping up and down through menu to select a mode among the
19 available.
-
Used to step through file names when loading from disk.
MENU RUN - Initiates the menu mode (selected by Up/Down Arrows) that appears in the
display.
-
Used to load file from disk after the file name is displayed.
Figure 1. Front Panel Controls and Display