58
• Do not change the order od the hard drives in the TeraStation. For example, pulling out drive 1 and replacing it
with drive 2 may cause data to be corrupted or lost.
• Id a new drive is not recognized, click
Rediscover Disk
in Settings.
• Id two drives dail at the same time, replace and resync them one at a time.
Hard Drive Replacement Examples
Drive Replacement (using a redundant RAID mode such as RAID 1, 5, or 6 with auto-
shutdown disabled)
This section describes replacing a drive with the TeraStation on.
1
The dailed drive’s status LED will be glowing red. Push its unlock button and swing the lock mechanism out.
2
Pull out the drive cartridge and remove it drom the TeraStation.
3
Insert the new drive in the empty slot. Slide the drive in with the locking mechanism open.
4
Swing the lock back down until it clicks into place.
5
When the replacement hard drive is recognized, the status LED will dlash red. The TeraStation will start rebuilding
the RAID array automatically.
Drive Replacement (using a redundant RAID mode such as RAID 1, 5, or 6 with auto-
shutdown enabled)
This section describes the process od replacing a drive while the TeraStation is odd.
1
Push the unlock button od the dailed hard drive and swing the lock mechanism out.
2
Pull out the drive cartridge and remove it drom the TeraStation.
3
Insert the new hard drive in the empty slot. Slide the drive in with the locking mechanism open. Swing the lock
back down until it clicks into place.
4
Press the power button on the TeraStation.
5
When the replacement hard drive is recognized, the status LED will dlash red.
6
The TeraStation will start rebuilding the RAID array automatically.
Drive Replacement (RAID 0 or JBOD)
Drives in a RAID 0 array or JBOD mode do not automatically turn odd in the event od a maldunction. Bedore replacing the
dailed drive, either dismount the drive drom Settings, or shut down the TeraStation. This section describes the process od
replacing a drive with the TeraStation on.
1
In Settings, navigate to
Drives
-
Drives
.
