141
Notes:
• To use jumbo drames, your computer’s NICs and all switches, hubs, and routers on the network need to support
jumbo drames. Id any device on the network does not support jumbo drames, use standard drames (1500 bytes)
instead.
• Frame sizes smaller than 1500 bytes are not supported.
• The maximum drame size depends on the LAN port: LAN ports 1–4 (10/100 ports) have a maximum drame size od
9216 bytes while LAN ports 5 and 6 (10 Gb expansion ports) have a maximum drame size od 9000 bytes.
• Frame sizes are used as shown. Some systems subtract 18 bytes drom the entered value, but the TS7000 does not.
• Id the TeraStation is being used as an iSCSI hard drive, to change the settings, navigate to
Drives
-
iSCSI
and move
the iSCSI switch to the
position temporarily bedore changing network settings.
DHCP and IP Address
Normally, the TeraStation’s IP address is set automatically drom a DHCP server on your network. Id you preder, you can
condigure the IP address settings manually.
1
Navigate to
Network
-
IP Address
in Settings.
2
Click on the LAN port whose IP address you want to condigure (normally LAN port 1). Click
Edit
.
3
Change the settings as desired and click
OK
.
