37
RMM (RAID Mode Manager)
With RMM, you can create or expand a RAID array without erasing the data on the drives.
Changing from JBOD to RAID 1
You must have at least two drives available in JBOD (not in a RAID array) to build the RAID 1 array with RMM.
1
Select the drive on which you do not want to erase data.
2
Check “Add a disk to RAID array with RMM. Your data will be preserved.”.
3
Select the drive to add to the RAID array.
4
Click
Create RAID Array
. The “Condirm Operation” screen will open.
5
Enter the condirmation number, then click
OK
.
Adding a drive to an existing RAID array
You can add a drive to a RAID 1, RAID 5, or RAID 6 array. Drives that can be added to the RAID array show “Normal (RMM
available)” or “Normal”.
Notes:
• Each drive must have the same capacity.
• RMM can be used to expand an array by one drive per operation. To expand by two or more drives, RMM must be
perdormed multiple times.
1
Click
Drives
.
2
Click
RAID
.
3
Choose a RAID array.
