Buffalo Surveillance Server Administrator'S Manual Download Page 358

Page: 358 / 404

Buffalo Surveillance Server

358

Click

[ Next > ]

. The

Ready to Add

window appears. Use to review the parameters for the

new Vault before actually adding the Vault.

Review the displayed summary and ensure that all of the values are correct.

When ready to add the new Vault, click

Next

. The Completed window appears.

Click

Finish

to exit the Add or Remove Vault Wizard. Restart the computer for the new Vault

activation. To add another Vault or remove a Vault, launch the Add or Remove Vault Wizard
again.

If you do not restart your computer, the new Vault will not start or be available for use.

After restarting your computer, Launch

Vault Admin

prepare media

for the Vault just

added. See the Administrator's Guide > Vault Admin > Actions > Prepare Media for
directions.

204

235

Summary of Contents for Surveillance Server





















































































































































































































































































































































































































Buffalo Surveillance Server, Administrator'S Manual, Page: 358 / 404

Search results

Summary of Contents for Surveillance Server

Reviews: