Buffalo Surveillance Server, Administrator'S Manual

Page: 254 / 404

Buffalo Surveillance Server 254
Click in the Vault Admin tool bar to launch the Load Media window. The Load Media
window will appear.
Select an option from the Media Location combo box. Select Load unknown media when
you want to load a unit of media that is already physically loaded into the Vault's storage
device. Select
Load from storage slot when you want to load a unit of media from a known
storage slot within the Vault's storage library.
Select a unit of media from the Choose media pull-down list (which will display all of the
media in the storage device).
Leave Force Re-Index set to Only re-index if needed . Buffalo Surveillance Server will
index the media only if necessary.
Click [ OK ] to complete the process. A new unit of media will appear in the media list .
Reload Media
As long as you are tracking media, your Vault will display the media, even if the media has
been unloaded from the storage device. Reloading media means to add it to the storage device
after it has been taken off line. If you are using tapes or glass media, insert the media into its
storage device. If you are using virtual media, you will not physically handle the media.
Use the Reload Selected Media window to load tape media (such as tapes that are outside
of a storage device) into a Vault or to re-index hard disk media. The Reload Selected Media
window is almost identical to the Load Media window.
In the left frame of the Vault Admin main window, click in front of the Vault into
which you wish to load media.
Click (and highlight) .
205
204
204