Buell Ulysses 2006, Service Manual, Page: 625 / 638

2006 Buell Ulysses: Electrical 7-71
HOME
15. Remove windshield and windscreen. See 2.44 WIND-
SHIELD AND WINDSCREEN .
16. See Figure 7-84. Disconnect:
● Ignition switch [33].
● Auxiliary power outlet [160].
● Turn signal flasher connector [30].
●
Instrument module connector [39].
●
Left switch housing connector [24] and right switch
housing connector [22].
● Turn signal connectors [31].
● Headlight connector [38].
● Horn connectors [122].
● Clutch switch [95] from left switch housing.
● Front brake switch [121] from right switch housing.
● Interactive exhaust actuator [161].
● O2 sensor [137].
● Temp sensor [90]
● Fuel injectors [84] & [85].
● Ground fastener at steering head.
17. Disconnect intake air temperature sensor [89]. See 4.36
INTAKE AIR TEMPERATURE SENSOR .
18. Disconnect throttle position sensor [88]. See 4.37
THROTTLE POSITION SENSOR .
19. Disconnect and remove ignition coil. See 4.32 IGNITION
COIL .
20. Cut and remove cable strap (7) securing main harness to
ignition switch.
21. Remove cable and main harness guide from steering
head.
22. Disconnect wiring located under sprocket cover. See
7.26 SPROCKET COVER WIRING .
23. Disconnect starter solenoid [128].
24. Remove connector from oil pressure switch [120]. Oil
pressure switch is located on front of engine. See 3.12
OIL PRESSURE INDICATOR SWITCH .
25. Disconnect fuel line at fuel rail.
26. Disconnect fuel pump connector [86].
Figure 7-84. Electrical Connectors Behind Windscreen
1. Turn signal flasher connector [30]
2. Instrument cluster connector [39]
3. Right handlebar connector [22]
4. Left handlebar connector [24]
5. Turn signal connectors [31]
6. Ignition switch
7. Cable strap
8. Main harness
9. Horn fastener
10. Horn mount
11. Horn connector [122]
12. Horn
9
4
8
3
2
1
5
10
12
7
11930
6
11
5