Buell Ulysses 2006, Service Manual, Page: 352 / 638

4-10 2006 Buell Ulysses: Fuel System
HOME
BREAKOUT BOX 4.6
GENERAL
The BREAKOUT BOX (Part No. HD-42682) splices into the
main harness. Used in conjunction with a DVOM, it allows cir-
cuit diagnosis of wiring harness and connections without hav-
ing to probe with sharp objects.
INSTALLATION
1. See 4.30 ELECTRONIC CONTROL MODULE .
2. Depress latches on each side of connectors [10] (black)
and [11] (gray) and detach connectors from the ECM.
3. See Figure 4-9. Attach Breakout Box (1) to black connec-
tor [10].
a. Attach black connector from Breakout Box to corre-
sponding black ECM connector.
b. Attach black connector from the wiring harness to
black connector on Breakout Box.
4. Attach Breakout Box to gray connector [11].
a. Attach gray connector from Breakout Box to corre-
sponding gray ECM connector.
b. Attach gray connector from the wiring harness to
gray connector on Breakout Box.
REMOVAL
1. See Figure 4-9. Depress latches on each side of connec-
tors [10] (black) and [11] (gray).
2. Detach Breakout Box connectors from ECM connectors.
3. Detach Breakout Box connectors from wiring harness.
4. Reconnect harness to ECM. See 4.30 ELECTRONIC
CONTROL MODULE .
Figure 4-9. ECM and Breakout Box with Connections
1. Breakout box
2. Breakout box grey and black connections at main
harness
3. Breakout box grey and black connections at ECM
4. ECM
1
4
2
11990
3