Buell Ulysses 2006, Service Manual, Page: 556 / 638

7-2 2006 Buell Ulysses: Electrical
HOME
TORQUE VALUES
Instruments
Turn signal indicator 1 1.12 0.08 Y0163.02A8
Check engine 1 1.12 0.08 Y0163.02A8
High beam 1 0.7 0.05 Y0162.02A8
Oil indicator 1 1.12 0.08 Y0163.02A8
Neutral 1 1.12 0.08 Y0163.02A8
Backlight
2 1.12 0.08 Y0163.02A8
1 0.7 0.05 Y0162.02A8
Low fuel Replace instrument cluster if low fuel warning lamp fails.
Table 7-7. Specifications
BULB CHART BULBS REQUIRED WATTS AMPS
PART
NUMBER
ITEM TORQUE NOTES
Actuator ground wire 72-96 in-lbs 8-11 Nm page 7-77
Battery (+) to starter fastener 60-85 in-lbs 7-10 Nm page 7-36
Battery terminal fasteners 72-96 in-lbs 8-11 Nm page 7-75
Exhaust actuator 36-40 in-lbs 4.1-4.5 Nm page 7-23
Handlebar control housing screws
(left side)
25-33 in-lbs 3-4 Nm page 7-56
Handlebar control housing screws
(right side)
25-33 in-lbs 3-4 Nm Longer screw on bottom, page 7-55
Horn fastener 36-60 in-lbs 4.0-6.7 Nm page 7-65
Horn mount assembly 36-60 in-lbs 8-11 Nm page 7-9
Ignition switch body fastener 12-36 in-lbs 1.4-4.0 Nm page 7-8
Ignition switch fastener 18-20 ft-lbs 24.4-27.1 Nm page 7-9
Instrument module fastener 12-36 in-lbs 1.4-4.0 Nm page 7-59
Interactive exhaust actuator fasteners 36-40 in-lbs 4.0-4.5 Nm page 7-77
License plate fasteners 36-48 in-lbs 4.1-5.4 Nm page 7-48
Main battery ground 72-96 in-lbs 8.1-10.8 Nm page 7-36
Negative battery cable at battery ter-
minal
72-96 in-lbs 8-11 Nm page 7-77
Neutral indicator switch 60-84 in-lbs 6.8-9.4 Nm page 7-67
Positive battery terminal fastener 72-96 in-lbs 8-11 Nm page 7-42
Rotor mounting fasteners 90-110 in-lbs 10-12 Nm LOCTITE 243, page 7-33
Spark plugs 11-18 ft-lbs 15-24 Nm page 7-1
Stator TORX mounting screws 30-40 in-lbs 3-4 Nm
T-27 TORX with retaining compound, replace
with new after each removal, page 7-33
Tail lamp 12-36 in-lbs 1.4-4 Nm page 7-47