Buell Ulysses 2006, Service Manual, Page: 150 / 638

2-26 2006 Buell Ulysses: Chassis
HOME
BRAKE PEDAL 2.9
REMOVAL
1. See Figure 2-38. Remove cotter pin (7) and discard.
2. Remove clevis pin (2).
3. Remove pedal fastener (5).
4. Remove shift brake pedal sleeve (4).
5. Remove pedal bushings (3).
6. Remove brake pedal (6).
INSTALLATION
1. See Figure 2-38. Install pedal bushings (3).
2. Install shift brake pedal sleeve (4).
3. Install brake pedal (6) using LOCTITE 272 (red) and
tighten fastener (5) to 22-24 ft-lbs (30-33 Nm).
4. Install clevis pin (2).
5. Install new cotter pin (7).
Figure 2-37. Brake Pedal
11128
Figure 2-38. Brake Pedal Assembly
1. Rear master cylinder body
2. Clevis pin
3. Pedal bushings (2)
4. Shift brake pedal sleeve
5. Brake pedal fastener
6. Brake pedal
7. Cotter pin
b1206x1x
1
2
4
5
3
7
6
3