Buell Ulysses 2006, Service Manual, Page: 257 / 638

2006 Buell Ulysses: Engine 3-23
HOME
19. Remove front “V” bracket with oil cooler from main frame .
a. Remove cable strap securing the remote idle adjust-
ment cable
b. Remove the three cable straps holding regulator wir-
ing harness in order to extend the harness to
remove “V” bracket
c. Remove front tie-bar from “V” bracket.
d. Remove front tie-bar from engine.
e. Unbolt “V” bracket from main frame.
20. See Figure 3-22. Remove center tie-bar from engine .
21. Remove rear tie bar from frame .
Figure 3-18. Electrical Connectors Under Sprocket Cover
1. Neutral switch [131]
2. Speedometer sensor connector [65]
3. Cam position sensor connector [14]
4. Alternator connector [46]
5. Voltage regulator connector [77]
6. Interactive exhaust cable
4
5
3
11970b
1
2
6