Buell Ulysses 2006, Service Manual, Page: 225 / 638

2006 Buell Ulysses: Chassis 2-101
HOME
SEAT 2.45
GENERAL
See Figure 2-135. The seat anchors in six places on the vehi-
cle. The first is a front tab (1) which fits into a slot in the frame.
Four seats hooks (2) slide onto the shouldered lugs located in
the left and right forward tail sections. The last is the seat lock
latch which fits into the slot on the seat latch.
REMOVAL
1. Insert ignition key into seat lock located at rear of motor-
cycle below taillight.
2. Turn key clockwise to disengage rear seat latch.
3. Grip the rear of the seat and pull towards the rear of the
motorcycle.
INSTALLATION
1 1
WARNING
1
WARNING
After installing seat, pull upward on front of seat to be
sure it is in locked position. While riding, a loose seat can
shift causing loss of control, which could result in death
or serious injury. (00070a)
1. See Figure 2-135. Position seat and slide forward to
engage the front tab (1) with the slot in the frame and the
four hooks (2) with the shouldered lugs on the tail sec-
tions.
2. Align rear tab with latch slot at rear of motorcycle.
3. Press down firmly on rear of seat to engage seat lock
latch (3).
4. Pull up on rear of seat to make sure latch is engaged.
5. Remove ignition key from seat lock.
Figure 2-135. Seat Attachments
1. Front tab
2. Seat hook
3. Seat lock latch
1
2
2
2
2
3