6
PC Base Section
Questions? Contact us at [email protected] or call (866) 325-8172
6
Questions? Contact us at [email protected] or call (866) 325-8172
7.
PC Base
The PC Base software is an application that runs on a
computer and communicates with up to 14 cameras via
the PC Base Modem. The software allows you to receive
pictures, to change settings on camera(s), check the
battery status/signal strength of the camera(s), and to
take a test picture. In addition, the PC Base can be setup
to email pictures to several e-mail addresses. Along with
the pictures in the email, you will receive battery status
information and the number of pictures left to transmit
from the camera(s) to the PC Base.
Important Note: Your computer must be turned on
with the PC Base Software open to be able to receive
pictures.
To get started, you will need to install the software,
USB drivers, and connect the PC Base modem to your
computer.
Please complete the following steps in order to
insure the PC Base will operate correctly.
A. Installing the PC Base Software
The following instructions apply to both Windows
©
2000
and XP.
Insert the supplied CD into the CD-ROM of your computer.
If the computer has autorun enabled, you will see a
Welcome Screen appear. Click the “
Install PC Base
Software
” option and follow the on-screen prompts to
complete the installation process.
Important Note: If you need to uninstall the PC Base
Software, be sure to Unregister any Cameras from the
PC Base before you uninstall.
B. Installing the USB Drivers
1.
The PC Base software CD should still be in the CD-
ROM drive.
2.
Connect the supplied wall adapter to the modem and
plug it into an AC outlet.
3.
Connect the PC Base modem to an available USB port
on your computer with the supplied USB cable.
Summary of Contents for RC-5000
Page 40: ...l l l l l 0 0 0 0 0 ...