Buckeye RC-5000 Owner'S Manual Download Page 5 | Manualshive

Page: 5 / 40

background image

4

www.buckeyecam.com

Questions? Contact us at [email protected] or call (866) 325-8172

4

Questions? Contact us at [email protected] or call (866) 325-8172

If you have a PC Base, you may want to skip to

Section 7

starting on page 6 to configure your PC Base Modem.

The images are stored on a memory card that is located in
the Portable Base. The memory card is similar to most
cards used in modern digital cameras. If you have a PC
Base, the images are stored on your computer.

When you want to view your pictures, you can go to the
Portable Base and remove the memory card located inside.
Take the memory card and insert the card into the
memory card reader that is included with your BuckEye
Cam

TM

. Make sure the card reader is connected to your

computer. All of the image files are saved in a .jpg format
and can be viewed easily with any picture/image viewer
software on your computer.

Although you may want to jump right into the camera
system, we recommend that you first connect the memory
card reader to your computer. Read the next section to
learn how to connect the card reader to your computer
and view the sample image located on the card.

Knowing the memory card reader is working properly
assures you that you will have no problems when you
finally view the first set of pictures your system captures.
We recommend you always keep a card in the Portable
Base to allow the pictures received to be saved to the card.

Multiple Camera Abilities

A BuckEye Cam’s Base is capable of supporting 14 indi-
vidual cameras. This means you can have 14 different
cameras taking and transmitting pictures to a single base.

If at any point you have questions or concerns, please feel
free to contact us during our normal operating hours or
e-mail us anytime.

6.

Connecting the Memory Card
Reader

The supplied Memory Card Reader and Memory Cards are
used to view and transfer the pictures from the BuckEye
Cam

TM

Portable Base to your computer.

«
...
3
4
5
6
7
...
»

Summary of Contents for RC-5000









































Reviews:

No comments

Related manuals for RC-5000

Giraffe OmniBed

Brand: Ohmeda Pages: 54

Brand: GE Pages: 698

Brand: Ognibene Pages: 28

Brand: Hameg Pages: 24

Brand: Vaisala Pages: 118

Brand: PacBio Pages: 13

Brand: Pablo Pages: 4

Brand: PA Pages: 28

Brand: Daikin Pages: 12

Brand: Napoleon Pages: 3

Brand: Daikin Pages: 52

Heart Guardian AED

Brand: Radian Pages: 36

Team Agile Color Tune TM16-0

Brand: GRAU Pages: 24

Brand: RAM Pages: 4

Brand: Life Fitness Pages: 45

VADA TWIN MOTOR MACERATOR

Brand: Reece Pages: 7

Brand: Petzl Pages: 15

Brand: Griven Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands