20
Portable Base Section
Questions? Contact us at [email protected] or call (866) 325-8172
20
Questions? Contact us at [email protected] or call (866) 325-8172
4.
Use the “Up and Down” buttons located to the right of
the display to choose the appropriate camera number
you want to delete. Example: CA-1 equals camera #1,
CA-2 equals camera #2, etc.
5.
Once you have chosen the correct camera number
press the “
Select
” button. The base should display
your signal strength and verify communications.
DO
NOT CONTINUE THIS PROCESS UNTIL YOU HAVE
ESTABLISHED COMMUNICATIONS!
6.
Once you have established communications with the
correct camera, press the “
Menu
” button on your
portable base.
7.
Use the “Up and Down” buttons to scroll through the
menu until you see “
DelCam
” on the display.
8.
Once you see “
DelCam
” on the display press the
“
Select
” button.
9.
Using the “Up and Down” buttons, select the correct
camera number you want to delete.
10. Once you have chosen the correct camera number
press the “
Select
” button. Use the “Up and Down”
buttons to scroll the display until you see “
DelYES
”
then press the “
Select
” button to confirm.
11. The camera will be automatically deleted from your
base and is now ready to be added to any base (PC or
Portable) or used in Stand-Alone Mode.
12. Repeat this process to delete more cameras.
C. Changing Camera Settings with a Portable
Base
The software to change camera settings or to add/edit the
text you want displayed on your pictures is located on the
memory card. After you connect the memory card reader
to your computer and insert the memory card, a window
will pop up displaying the contents of the memory card
(see figure on the next page). If this window does not
appear automatically, click on the My Computer icon on
your desktop and then click on the removable disk icon.
Summary of Contents for RC-5000
Page 40: ...l l l l l 0 0 0 0 0 ...