Dillon’s New Dynamic Pistol Dies
& Three-Die Rifle Die Sets
Instruction Manual, May 2007
illon
recision
Products, Inc.
8009 E. Dillon’s Way
Scottsdale, AZ 85260
Technical Support • (800) 223-4570
(480) 948-8009 • FAX (480) 998-2786
Fig 1. Dillon’s New Dynamic Die Set, cut
away so that you can see how they look and
how they operate. From left to right they
are: Full length sizing and decapping die,
seating die (with the double ended seating
stem) and the crimp die. Note that the seat
die and the crimp die have clips on the top
to allow the insert to be removed without
affecting the critical die adjustments.
Adjust
the sizing die by screwing the die
body down until it contacts the shellplate and
snug the lock ring. The decap assembly should
be screwed fully into the die at all times.
Dillon’s “New Dynamic” Pistol Die Sets
Fig 1
Dillon Die Instructions, May 2007 5/22/07 1:47 PM Page 1
