9
PC Base Section
Questions? Contact us at [email protected] or call (866) 325-8172
9
Questions? Contact us at [email protected] or call (866) 325-8172
9.
After the first driver is installed you will be prompted
to install the second driver. Repeat steps 4 through 8
for the second driver.
Note: If you connect the PC Base Modem to a different USB
port, the Windows software may prompt you to install the
drivers again. In this case, just follow the instructions
above. For your convenience, a copy of the drivers are
located in the folder where the PC Base is installed.
C. PC Base Authentication Code
Note: before you start the PC Base software, make sure the
drivers are installed as described in section B on page 6
and the PC Base Modem is connected to the computer and
plugged into an AC outlet.
When you start the software the first time, it will appear
as shown below:
At this moment, the PC Base Modem is not operating and
cameras cannot communicate with it.
Click the Start button to activate
the PC Base. When the PC Base
tries to communicate with a new
modem the first time, it will
request an authentication code
as shown to the right.
Summary of Contents for RC-5000
Page 40: ...l l l l l 0 0 0 0 0 ...